Double Skin Partitioning

Elite double skin partitioning

The alternative Partitioning System for installations where a smooth interior finish is required. Works offices, clean rooms and storage areas for chemicals and food products

Specification

Panels are constructed from 43 x 43 x 1.2 mm (18g) cold-rolled angles and 32 x 32 x 0.7 mm (22g) cold-rolled T bars with 0.8 mm (21g) CR4 mild steel or 50 x 50 x 3 mm (10g) weldmesh sheets, spot-welded into the framework.

Standard Panel Sizes

Height 2400, 2700, 3000 mm
Width 1000 mm
Dado Height 1200 mm
Thickness 43 mm

A range of infill and special size panels can be supplied to maintain final dimensions.

Mullion Sizes

50 x 50 x 2.5 mm – up to 2700 mm high
80 x 40 x 2.5 mm – 2700 mm and above 100 x 50 x 3.0 mm – to suit installation.

All Two-Way (intermediate) mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability and strength, e.g. on clear access doors.

Standard Door Module Sizes – Steel or Timber

Side Hung Doors height 2022 mm width 1000 mm*
Double Doors height 2022 mm width 1940 mm*
Sliding Doors to suit customer’s requirements

*Plus overpanel to partition height

Doors can be supplied with or without vision panels.
A full range of non-standard door types, i.e. full height leaves, clear access
modules or hospital type leaves are available to order.

Glazing

Pyroshield are supplied as standard. However, other types of glass and Perspex may also be fitted as required.

Double glazed panels may be supplied using a 14mm sealed unit with 4 mm toughened glass to both sides and retained in the panel by steel glazing beads.

All panels are electrostatically powder-coated in the following standard colours: Grey 10 A 07, Grey 00 A 05, Sandstone 08 B 17 and Stone 10 B 17. Special colours (over 100 in stock) are available at extra cost.

A comprehensive range of accessories, including drop-down and sliding hatches, louvres, vents and locking systems are available to order.